Roof Costs in Texas (2026)

CostMyProject Research Team Prices checked October 2026

A roof replacement on a standard 2,000 sq ft Texas home costs about $15,555 at 6/12 pitch with architectural shingles — $1,565 below the national average of $17,120. The entire difference is labor: Texas construction wages run below the national average, while materials, tear-off, and permits cost the same. This page shows the Texas math, how it compares to the South average, and what the Texas number does not include.

The Texas worked example: same roof, Texas labor

Same roof as our national example: a 40×50 ft colonial, 2,000 sq ft footprint, 6/12 pitch (roof surface 2,236 sq ft), architectural shingles, one-layer tear-off, $350 permit. Only the labor line changes — scaled by the Texas labor multiplier of ×0.80.

Line	National	Texas (×0.80 labor)
Materials ($2.50/sq ft × 2,236)	$5,590	$5,590
Pro labor ($3.50/sq ft × 2,236)	$7,826	$6,261
Tear-off, 1 layer ($1.50/sq ft × 2,236)	$3,354	$3,354
Permit	$350	$350
Total	$17,120	$15,555

Texas labor: $7,826 × 0.80 = $6,261. Per roof square foot: $6.96 in Texas vs $7.66 nationally.

Texas vs the South average

Texas sits in the South region, but the Texas number is lower than the South average — because the South average blends in higher-wage states. For the same roof:

Market	Labor multiplier	Pro labor	Total
National average	×1.00	$7,826	$17,120
South average	×0.89	$6,965	$16,259
Texas	×0.80	$6,261	$15,555

So a Texas quote roughly $700 below a generic "Southern" estimate is not a bargain or a red flag — it is what the Texas wage data predicts. The reverse also holds: a Texas quote at the national average deserves a second look at what is in it.

How the Texas multiplier is calculated

The ×0.80 figure is the Texas state average for construction laborers from the U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics (May 2023), ratioed to the national mean wage — the same dataset behind this site's ZIP-by-ZIP labor adjustment. In our ZIP3 data, all 49 Texas ZIP3 areas carry the state-average value (range ×0.80–×0.82), so the state figure is stable, not driven by one metro. Materials are not scaled: shingles cost the same in Texas as nationally in this model. Enter your ZIP in the roof cost calculator for your metro's exact multiplier.

What the Texas number does not include

Pitch and stories. Steep pitches (+15% at 9/12, +25% at 12/12) and second stories (+10–20%) raise labor on top of the Texas base.
Decking replacement. Rotten decking found during tear-off is billed per sheet on top of the quote.
A second tear-off layer. The example assumes one layer; two layers roughly double the $3,354 tear-off line.
Storm and hail effects. The multiplier is labor-only. Hail history, code upgrades, and insurer requirements show up in individual Texas quotes, not in this average.

The honest way to use this page: treat $15,555 as the Texas baseline for this exact roof, then adjust for your pitch, stories, layers, and decking — or run your roof in the calculator with your ZIP.

Storm damage note: what insurance pays depends on whether your policy settles at ACV (depreciated value) or RCV (full replacement, with depreciation recoverable after completion). Our national worked example — $17,120 roof, 18 years old on a 28-year life, $1,000 deductible assumed — pays a $5,114 first check on ACV versus the full cost minus deductible on RCV. The full math, with assumptions stated, is on the roof calculator's insurance section. Insurers use their own depreciation schedules; this is not a coverage determination.

Texas roof cost FAQs

Why is Texas cheaper than the South average?

Because the Texas state-average labor multiplier (×0.80) is below the South regional mean (×0.89). The South mean blends higher-wage states with Texas, so a Texas-specific figure lands lower. The gap is $704 on the example roof, all labor.

How is the Texas multiplier calculated?

From BLS OEWS May 2023 mean wages for construction laborers: the Texas state average ratioed to the national mean. All 49 Texas ZIP3 areas in our data carry the state-average value (range ×0.80–×0.82).

Does the Texas estimate include hail or storm costs?

No. The multiplier adjusts labor only; materials, tear-off, and permit are national figures. Storm-related code upgrades or insurer requirements appear in individual quotes — get at least two local Texas quotes before deciding.